Home > News > Content

Curing Furnace Operation Process



1. First of all, the trolley and the furnace inside clean.

2. Power supply switch, turn on the device "Power switch" button (key knob right)

3. Open the furnace door, the mold and materials put on the stage of the car into the oven, close the oven.

4. Set the oven temperature, and open the oven "fan" and "warming" button.

5. To reach the curing time to open the door, the trolley to launch the oven, remove the solidified material.

6. When the work is finished, close the "warming" and "fan" buttons respectively to make the heating system and the blower system stop working.

7. Finally closes the "power switch" knob, close the main gate, open the furnace door, remove the dried material, the work process.


Products List
  • +Reflow Oven
  • +Wave Soldering
  • +Curing Oven
  • +SMT Peripheral Machine
  • Contact Information
    Shenzhen HB Automation Equipment Co.,Ltd
    Tel:+86-755-27272795
    Fax:+86-755-27271140
    Address:HB Industrial Park,No.1 of TianYang Road 6th,Songgang,Bao'an District Shenzhen,China
    Website:www.smthba.com
    Follow Us
    Stay in touch with HB
    submit